I have started designing assembles in Fusion 360 using T-Slot, a lot of head scratching on how to make use of it at arbitrary lengths in my designs… I started by making a 20mm length of T-Slot as its own model in Fusion 360; This is model has all of […]
ROV
6 posts
Over on Facebook, Ed Vergalen is looking to sell a VideoRay Pro 4 Plus BASE ROV System for £29,950. Videoray Pro 4 Blueview sonar C130 Manipulator Hull Crawler Kit Lynn enhancing package Extended Tether Deployment System (TDS). Approximately 305 m (1,000 ft) Extra 300m Neutral Tether on reel Repair kit […]
After my last attempt at getting MyOpenLab to work on macOS, I posted my question on the MyOpenLab Facebook group, where I was given the following response: Hello, what version of MyOpenLab, Java and OSX are you testing? You could test the most recent development version: https://myopenlab.org/…/distribution_macosx_3.12.1.zip The fail could […]
A beautiful print using my roll of Filamentive grey filament, this is the battery and electronics sledge for my 3d Printed ROV. I am doing my design in fusion360, and printing the parts on our Prusa MK3s. Thanks to Ravi Toor of Filamentive for getting me the filament to play […]
After the success of printing the sledge for my DIY ROV in the last post, It is now time to try and wire it up, I am using two of these Youmile 3S Battery Protection Board Modules, they claim to be capable of managing 10A, which I feel is pushing […]
I have been working on my DIY underwater ROV (remotely operated vehicle) for a fair while. It is going to be an underwater robot, sometimes people call them remote controlled submarines. I have moved some of the development to my Professional site: In the interim, I am going to have […]