I just realised that in Part 1 and Part 2 that I didnt discuse how to go from Datasheet to Fusion 360, While I am not going to cover how to do the drawing in great detail, there are plenty of sites which tell you how to make drawings in […]
CAD
3 posts
I found some cheap small microswitches on AliExpress, working backwards I found the same switch part numbers, and subsequently found a Switch Data sheet for the same size part. I use a mix of Fusion 360 and KiCAD for design, so I CADDed up the three flavours of microswitches, using […]
I have been playing about with Fusion 360, one of thrings you will need to include before very long is a fixing, even if you can 3D print everything in your design at some point you will want to stick two parts together at which point you will need a […]