A beautiful print using my roll of Filamentive grey filament, this is the battery and electronics sledge for my 3d Printed ROV. I am doing my design in fusion360, and printing the parts on our Prusa MK3s. Thanks to Ravi Toor of Filamentive for getting me the filament to play […]
Fusion 360
13 posts
After having a go at assembling the ears printed in the [[blog:k9_nose_gun|last post]], I decided to have a go at making something a little easier to assemble. [[wiki:projects:k9:reference:mat_prentis|Mat Prentis]] assembled this guide that gave me the dimensions below: Heading into Fusion360 I generated the following model: [[tag:thinkl33t]] Sliced it and […]
I have been trying to design a K9 for 3D printing for a while, even using Fusion 360 getting the body design has been a stumbling block, On Facebook, there is a k-9 builders community and a link to a OneDrive account with 200 x 200 sliced STLs. I have […]
I just realised that in Part 1 and Part 2 that I didnt discuse how to go from Datasheet to Fusion 360, While I am not going to cover how to do the drawing in great detail, there are plenty of sites which tell you how to make drawings in […]
Following on from From Datasheet to KiCad Component – Part One, I had got as far as making the footprint in KiCad the Footprint Editor, The layers I have built it out of look like this: Now we have the footprint finished for Type C (I also did Type A […]
I found some cheap small microswitches on AliExpress, working backwards I found the same switch part numbers, and subsequently found a Switch Data sheet for the same size part. I use a mix of Fusion 360 and KiCAD for design, so I CADDed up the three flavours of microswitches, using […]
I have started designing assembles in Fusion 360 using T-Slot, a lot of head scratching on how to make use of it at arbitrary lengths in my designs… I started by making a 20mm length of T-Slot as its own model in Fusion 360; This is model has all of […]
I have been back in Fusion 360 designing parts for my wind turbine: These are parts of the hub, they are the bearings 3D printed to be the size of F 6902-2RS (15x28x7 mm) bearings that are commercially available, the printer settings have been edited slightly, so I still have […]
Following on from my Makevember post yesterday, where I tried to make turbine blades, and Failed… I fed 6050 from SG6050 into Fusion 360 and this is what it gave me: SG6050 profile To check it wasnt it that was broken, I ran the script with the defult value of […]
Following on from my previous Makevember posts… This is another virtual post, I built the Wind Turbine Hub as designed by Daniel Davis, one of the changes I would like to make, is the methord of making the blades. It looks like Daniel has a background in Mechanical Engineering, and […]
Today’s Makevember There seems to be very little consensus on the arangement of the colours of the buttons on the back of K-9, K9 has a 4 x 3 array of buttons on his back, I am using this image Binary kitten got me from the k9 at the Doctor […]
I have been playing about with Fusion 360, one of thrings you will need to include before very long is a fixing, even if you can 3D print everything in your design at some point you will want to stick two parts together at which point you will need a […]
A while ago I tried to design a 3D printed ROV hull, one of the problems of OpenSCAD is the difficulty of making cool organic or rounded shapes, while you do have access to both the Minkowski, and hull commands to make nice organic shapes. The use of linear_extrude to […]