Following on from my previous Makevember posts… This is another virtual post, I built the Wind Turbine Hub as designed by Daniel Davis, one of the changes I would like to make, is the methord of making the blades. It looks like Daniel has a background in Mechanical Engineering, and […]
Makevember
7 posts
Following on from my Makevember post yesterday, where I tried to make turbine blades, and Failed… I fed 6050 from SG6050 into Fusion 360 and this is what it gave me: SG6050 profile To check it wasnt it that was broken, I ran the script with the defult value of […]
Today’s Makevember There seems to be very little consensus on the arangement of the colours of the buttons on the back of K-9, K9 has a 4 x 3 array of buttons on his back, I am using this image Binary kitten got me from the k9 at the Doctor […]
I have been a bit lax on my Makevember posts; these were just quick prints I lobbed on the 3D Printer: bathtub boat (visual benchy) Duplo train joint The Duplo Train Joints are for MiniBoyGeek, the other part will appear once I have printed the rest of it.
After my previous attempts at cadding up air foils, that can be found here and here for #Makevember, I came across QBlade; According to Wikipedia: QBlade is an open source wind turbine calculation software, distributed under the GNU General Public License. The software is seamlessly integrated into XFOIL, an airfoil […]
Another boat: I was trying to dial in a 3D printer, the blobs on the hull seem to be caused by buffer under-runs from the Raspberry Pi. In the last Makevember post, there were some strange shaped Duplo links, here they are in use:
I have been back in Fusion 360 designing parts for my wind turbine: These are parts of the hub, they are the bearings 3D printed to be the size of F 6902-2RS (15x28x7 mm) bearings that are commercially available, the printer settings have been edited slightly, so I still have […]